- Overview
- Product Description
- Our Advantages
- Applications
- Product Parameters
- After Sales Service
- Packaging & Shipping
- Detailed Photos
Basic Info.
Packaging & Delivery
Product Description
Bending insensitive multimode fiber meets or exceeds the IEC 60793-2-10 specification, with stable fiber profile structure control and good repeatability. It is designed specifically for high-speed local area networks and is suitable for gigabit or faster Ethernet networks (1&10&40&100&400Gb/s).
The bending insensitive multimode fiber is optimized for 850nm VCSELs design, which ensures the optimal bandwidth of the fiber at 850nm wavelength and superior transmission performance when using VCSEL laser as the light source. This series of fiber preform rods adopts the chemical vapor deposition process inside the tube, which has the advantages of low hydroxyl groups and good optical uniformity. The double-layer UV cured acrylic resin coating on the optical fiber reduces additional bending attenuation and exhibits good bending resistance at small bending radii. It also has high tensile strength and long-term fatigue characteristics.
1. Optimize the design for 850nm VCSELs
2. High bandwidth, low differential mode delay
3. Bending additional attenuation
4. Compatible with conventional OM2 and OM3 optical fibers
1. Data Center
2. High performance computing center
3.1&10&40&100&400Gb/s
4. Various types of optical cables
| Characteristic | Unit | Condition | Index |
| Optical characteristic | |||
| Decay | dB/km | 850nm | ≤2.5 |
| dB/km | 1300nm | ≤0.8 | |
| Full bandwidth injection | MHz.km | 850nm | ≥1500/≥3500 |
| MHz.km | 1300nm | ≥500/≥500 | |
| Effective mode bandwidth | MHz.km | 850nm | ≥2000/≥4700 |
| Numerical Aperture | / | / | 0.20±0.015 |
| DMD | Meet or exceed the IEC60793-2-10 standard | ||
| Effective group refractive index(Neff) | / | 850nm | 1.4573 |
| / | 1300nm | 1.4571 | |
| Zero-dispersion wavelength(λ0) | nm | / | 1295-1340 |
| Zero-dispersion slope(SO) | PS/(nm²km) | 1295≤λ0≤1310nm | ≤0.105 |
| Local discontinuity point | PS/(nm²km) | 1310≤λ0≤1340nm | ≤0.000375(1590-λ0) |
| Geometric characteristics | |||
| Core diameter | μm | / | 50.0±2.5 |
| Core out of roundness | % | / | ≤5.0 |
| cladding diameter | μm | / | 125.0±1.0 |
| cladding non-circularity | % | / | ≤1.0 |
| Core/cladding concentricity | μm | / | ≤1.5 |
| Coating diameter | μm | / | 245±7 |
| Concentricity of coating/cladding | μm | / | ≤10.0 |
| Length of fiber-optic | Km/dish | / | 1.1~8.8 |
| Environmental(850nm&1300nm) | |||
| Temperature cycle additional attenuation | dB/km | -60ºC~+85ºC | |
| Immersion additional attenuation | dB/km | 23ºC±2ºC,30days | |
| Damp heat additional attenuation | dB/km | 85 ºC, 85% relative humidity, 30 days | |
| Dry heat aging with additional attenuation | dB/km | 85ºC,30days | |
| mechanical properties | |||
| Filter intensity | kpsi | / | 100 |
| Macro bend 2 circles with a diameter of 30mm | dB | 850nm | ≤0.10 |
| dB | 1300nm | ≤0.30 | |
| Macro bend 2 circles with a diameter of 15nm | dB | 850nm | ≤0.20 |
| dB | 1300nm | ≤0.50 | |
| Coating peeling force | N | Average value | 1.0-5.0 |
| N | peak value | 1.3-8.9 | |
| Dynamic fatigue parameters | / | / | ≥20 |
For specific installation and operation, please refer to the product manual or contact customer service for operation tips or videos after receiving the product. The equipment is guaranteed for one year, and artificial or abnormal damage is not covered by the warranty. If it exceeds one year, a certain fee will be charged for the relevant after-sales service. This device will continue to be optimized and improved due to various factors. At that time, please pardon us not notify separately. Thank you for your support and understanding.
Main Export Countries & Areas:
USA, UK, Japan, Germany, Spain, France, Swiss, Korea, Russia, Mexico, Brazil, Argentina, Pakistan, India, Portugal, Canada, New Zealand, South Africa, UAE, Egypt, Norway, Netherland, Russia, Australia, Saudi Arab, Turkey, Finland, Poland ,etc.
Payment Method: by T/T or Western Union or L/C
Delivery time: 7-10 days.
Quality Warranty: Shanghai Z-printing offers quality warranty for our lasers products with "3R" policy. For any inferior-quality products, Z-printing company is responsible for return, replacement and refund.
